Deep freezers

ID d'affichage: M96643
Prix ​​sur demande
Envoyer une demande
images
Deep freezers - acheter d'occasion/uploadpic/tramaofinal_inserat/bilder/96643/bild1.jpg

Fabricant

Fryka

Description

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration

Freezer down to -40°C
Tyxp TTS 40-944U
Manufacturer Fryka Kältetechnik GmbH
LED temperature display
Electronic control ST100 (membrane keyboard)
Alarm equipment
Standby switch
Current connection 400Volt, 16A

Former original price 20.000.-EUR

Quote from manufacturer description:
'The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°.
The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior.
The inner shell is made of stainless steel 1.4301 with a net capacity of 944 litres.
Interior dimensions are: width 1.300mm, depth 840mm, height 1.210mm
To the right of the cold room is the refrigeration unit with 3 fully hermetic compressors. The cooling unit and the release of the process heat is carried out via three lamellar capacitors which are force-ventilated by axial fans.
In the interior in the left and the right side wall there are 2 recirculation fans each. These are used for better temperature distribution in the interior. The recirculation fans are switched off by a lid switch when the lid is opened so that all the cold air is not blown out.'

Dimensions follow

Loading is no problem.

Further information on request

Special price

état

Machine sous tension

non
Envoyer une demande

Offre de:

Frank Sprengel Metallbearbeitungsmaschinen

Frank Sprengel Metallbearbeitungsmaschinen
Auf dem Holleter 55
45138 Essen

contact: Frank Sprengel

Envoyer une demande
Afficher le numéro de téléphone
numéro de téléphone: 0049 201 5067780
Afficher le profil de l'entreprise



Autres offres intéressantes de cette catégorie

Beil Plate Punch
Beil Plate Punch

Prix ​​sur demande
CNC Turning- and Milling Center DMG-GILDEMEISTER CTX Gamma 1250 TC
CNC Turning- and Milling Center DMG-GILDEMEISTER CTX Gamma 1250 TC (BJ.2009)

Prix ​​sur demande
MWM TBG 620 V16 K
MWM TBG 620 V16 K

Prix ​​sur demande
Theimer Copymat
Theimer Copymat

Prix ​​sur demande
Vertikalfräsmaschinen: KLOPP FS 11
Vertikalfräsmaschinen: KLOPP FS 11 (BJ.1972)

Prix ​​sur demande
Clamping Table SIEGMUND 16, PROFESSIONAL EXTREME 8.7
Clamping Table SIEGMUND 16, PROFESSIONAL EXTREME 8.7

Prix ​​sur demande
VDI 40, angular tool holder, coupling DIN 1809, with internal cooling
VDI 40, angular tool holder, coupling DIN 1809, with internal cooling

Prix ​​sur demande
Klaeger BR 71
Klaeger BR 71 (BJ.2000)

€ 3.200,-
Collet chuck for collets according to DIN 6499/B, ER Type, with internal coolant supply, Form E4 DIN 69880
Collet chuck for collets according to DIN 6499/B, ER Type, with internal coolant supply, Form E4 DIN 69880

Prix ​​sur demande
1978 Weinbrenner  AP 80.2
1978 Weinbrenner AP 80.2 (BJ.1978)

Prix ​​sur demande
CO