Machines d'occasion: Machines de travail des métaux

This Emco Emcomill E 1200 Vertical Machining Center was made in 2014 in Germany and has 14677 production hours, of which 3402 are spindle hours. It is equipped with a Siemens Sinumerik 828 D control ...

This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in ...

This BROTHER TC-32BN FT Vertical Machining center was made in 2008 in Japan. It is equipped with a Brother B00 control unit.
Control Unit
Brand: Brother
Model: B00

Main ...

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 ...

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 3 axis. The machine has a ...

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be ...

This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain ...

This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped with a Fanuc Series FS31i control unit. The machine has a spindle speed of 200-20000 rpm.

This HARDINGE XR 600 5AX Vertical Machining center was made in 2011. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm, is in very ...

This HEDELIUS CB 70-3200 Vertical Machining center was manufactured in the year 2000. It is equipped with a HEIDENHAIN TNC control unit.
General Data
Machine weight: 14000

This Hurco VMX30 Vertical Machining center was manufactured in the year 2000 in Taiwan. It is equipped with a Hurco Ultimax control unit. The machine has a spindle speed of 10-10000 rpm.
General ...

This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit.
Control Unit
Brand: Fagor

Movement
X-AXIS ...

This Okuma Genos M560R-V Vertical Machining center was manufactured in the year 2016 in Taiwan and has 7265 production hours, of which 1841 are spindle hours. It is equipped with an Okuma OSP-P300M-R ...

This HAAS VM3 Vertical Machining center was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.
Control ...

This HAAS VF3SS Vertical Machining center was manufactured in the year 2016 and has 22849 production hours. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.

This Okuma MX-50HB Horizontal Machining center was made in 1997 in Japan. It is controlled by an Okuma OSP700M control unit and has 3 axis. The machine has a spindle speed of 50-10000 rpm.

This Feeler FMH-500 horizontal machine center was made in the year 2007 in Taiwan. The machine has a spindle speed of 10000 rpm and 2 changing pallet tables. Accessories included in the offer: laser ...

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.
General Data
Machine ...

This FIDIA HS 664 Vertical Machining Center was manufactured in the year 2005 in Italy and has 56206 working hours of which 23370 are cutting time. It is equipped with a FIDIA C1 control unit and has ...

This RÖDERS 600 RFM-2 Vertical Machining center was manufactured in the year 2004 in Germany.
Movement
X-AXIS Movement: 600 mm
Y-AXIS Movement: 450 mm
Z-AXIS Movement: 300 mm

This OKUMA MB 56-VA Vertical Machining center was manufactured in the year 2003. It is equipped with an OKUMA OSP U100 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

This Deckel Maho 70V Universal Machining center was manufactured in the year 2000 in Germany and has 31665 production hours. It is equipped with a Deckel Maho control unit. The machine has a spindle ...

This Quaser MK603HPD Horizontal Machining Center from 2004 was built in Taiwan. It is equipped with a Fanuc Series 18I-MB control unit. This 4 axis machine can work with a spindle speed up to 15000 ...

This Deckel Maho DMU 50 Vertical Machining Center was manufactured in the year 2008 in Germany. It is equipped with a DMG HEIDENHAIN iTNC 530 control unit and has 3 + 2 axis. The machine has a ...

This Kitamura Mytrunnion 5 Vertical Machining Center was manufactured in Japan in 2014. This 5 axis machine is operated through a Fanuc 30i model B control unit. This machine can work with a spindle ...

The machine is in good technical condition, not under power.

Details:
Max. Schleifdurchmesser: 160 mm
Max. Schleiflänge: 250 mm
Max. Werkstückgewicht: 10 kg

The machine is in good technical condition and can be tested.

Details:
Max. Blechdicke: 10 mm
Blechbreite: 3000 mm
Anzahl von Biegezylindern: 4
Antriebsart: ...

Technische Daten:
Verfahrwege X/Y/Z: 1000 / 1150 / 1000 mm
Max. Werkstückbreite: 1320 / D1000 mm
Max. Werkstückhöhe: 1580 mm
Positionsstreubreite Ps: 0,004 mm

Technische Daten:
Verfahrwege X/Y/Z: 800 mm
Max. Werkstückbreite: 1130 / D900 mm
Ma. Werkstückhöhe: 1350 mm
Positionsstreubreite Ps: 0,004 mm

Technische Daten:
Arbeitsbereich X/Y/Z-Achsen: 1020 / 620 / 610 mm
Drehzahlbereich - Vertikalspindel stufenlos regelbar: 1 - 8000 1/min
Abstand Spindel / Tisch: min. / max. 80 / ...

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending ...

This RAPID MFC EVOLUTION II Universal Machining center was manufactured in the year 2009. It is equipped with a PC-controlled control unit. The machine has a spindle speed of 18000 rpm.
Control ...

This Matec 30HV Vertical Machining Center was manufactured in the year 2018 in Germany and has 21719 production hours. It is equipped with a HEIDENHAIN TNC 640 control unit and has 4 axis (4 axis, ...

This AXA VHC 2-3500 S horizontal machine center was made in the year 2006, was retrofitted with a reinforced spindle, overhaul performed by AXA in May/June 23 and has 30154 hours. It is equipped with ...

This AXA VHC-2 Vertical Machining center was manufactured in the year 2010 in Germany and has 35000 production hours. It is equipped with a Siemens 840 D pl control unit. The machine has a spindle ...

This SAMAG MFZ 2-2 horizontal machine center was made in the year 2008 in Germany. It is equipped with a Siemens Sinumerik and has 5 axis. The machine has a spindle speed of 16000 rpm.
Control ...

This EMCO E900 Vertical Machine Center was manufactured in the year 2015 and has 39500 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 10000 rpm.

This MAZAK MTV655/60 Vertical Machining center was manufactured in the year 1996 in Japan. It is equipped with a MAZATROL M PLUS control unit. The machine has a spindle speed of 25 - 6000 rpm.

This HARTFORD HEP - 3150 (2013) vertical machine center was made in the year 2013. It is equipped with a Mitsubishi Steering control unit. The machine has a spindle speed of 10000 rpm.
Control ...

This HAAS UMC-750 Vertical Machining center was manufactured in the year 2016 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 12000 ...

This Ken Focus5 2022 Universal Machining Center was manufactured in the year 2017 in Taiwan. It is equipped with a HEIDENHAIN control unit and has 5 axis. The machine has a spindle speed of 24000 ...

This EUMACH LBM-1500 vertical machine center was built in the year 2014 in Taiwan. The machine has 3 axis, a maximum working dimensions of 1600 x 1000 mm with a maximum load of 3000 kg. It is equipped ...

This FIDIA DIGIT 318 FH Vertical Machining center was manufactured in the year 2000. The machine has a spindle speed of 30000 rpm.
Main drive
Spindle speed range: 30000
Spindle motor ...

This Quaser MK603SP/12B Vertical Machining center was manufactured in the year 2011 in Taiwan. It is equipped with a Fanuc 18i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 ...

This Hurco VMX 50 S vertical machine center was manufactured in the year 2006 in Taiwan and has 44000 hours. It is equipped with a Hurco Ultimax control unit. It is equipped with Renishaw.

This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.
Control ...

This Deckel Maho DMU 80T Vertical Machining center was manufactured in the year 2001 and has 55500 production hours. It is equipped with a HEIDENHAIN TNC 420 control unit and has 3 axis.
Control ...

This DECKEL MAHO DMC 60T Horizontal Machining center was manufactured in the year 2008. The machine has two linear guides with a ball screw on each of the three axes X, Y and Z. See photo and video ...

This GENTIGER GT-1614 Vertical Machining center was manufactured in the year 2010. It is equipped with a HEIDENHAIN control unit.
General Data
Measurements width: 4665 mm

This Mitsui Seiki HU40A Horizontal Machining center was manufactured in the year 2005 in Japan. The machine has a spindle speed of 12000 rpm.
Main drive
Spindle speed range: 12000