Injection machine de moulage – 2021 AEB Demiplus 50

emplacement

Fabricant

numéro de la machine

Description

2021 AEB engineering, water demineralization system which has run less than 10 hours and is not used since then.

1) Be sure you have an Appropriate Area for the size of the machine
a. Demiplus 50
cm: 106 x 42 x 115 h
b. Demiplus 150
cm: 170 x 75 x 210 h

2) All Demiplus 50 and 150 Fittings are Hose Connector for Hose Ø D32 / 1”
- Water inlet;
- Demi Water outlet;
- Drain.

3) Provide a Stock Tank for Demineralized Water
a. 20 Hl (StabyMatic 500);
b. 35 Hl (StabyMatic 1000).

4) Electrical Connection: Plug 2 Poles + Earth, 220 V, 16 A for Maximum Consumption of
a. 1 Kw (Demiplus 50);
b. 1 Kw (Demiplus 150).

Technical Specifications DemiPlus 50 DemiPlus 150
Flow Rate 2000 L / h 4000 L / h
Product Consumption for Regeneration
- Acid+Demi;
- AlcaKg 18 / L 15
Kg 18 / L 14
Kg 52 / L 45
Kg 54 / L 42

Water Consumption for Regenerating
Process
1800 L 3300 L
Requested Regular Water Flow Rate At least 2 Mc / h At least 4 Mc / h
Max Pressure Regular Water Inlet Not over 3 / 4 Bar Not over 3 / 4 Bar
Preparations to check before to start up
DemiPlus 50 or 150 Plant
2

5) Air Supply with dryer and constant pressure between 6-8 Bar.
Air Supply Fitting is a Quick Coupling for Connection with a 6 mm Tube.
6) Enough Regenerating and Cleaning Products “Acid+Demi”, “Alca-“ to start up the plant and
do the first tests

TECHNICAL CHARACTERISTICS
Demiplus consists of
2 fibreglass columns with external epoxy fibreglass filaments, an internal shell in a single piece made of blowmoulded iso-gel, an injection moulded plastic base, injection moulded threaded connections, tested at 8 bar, and filters according to DIN 19643. 2 pneumatic multi-way valves made of PVC, for the management of the functions of all the columns with PVC injectors including the suction of the regenerating solutions inside the column heads. 2 pneumatic valves for the suction of the reagents and reflux control. 2 flow meters to view and control the flow rate of the reagents. Cationic resin macroporous polystyrene cationic resin with strong cross-linking and high exchange capacity. Resistant to oxidation and to osmotic pressures, specific for water and with uniform particle size to minimise pressure drops and maximise cycles. Anionic resin macroporous polystyrene anionic resin with strong cross-linking and high exchange capacity. Resistant to oxidation and to osmotic pressures, specific for water and with uniform particle size to minimise pressure drops and maximise cycles. Control unit for the automatic management of the plant, complete with conductivity reader. Skid frame made of AISI 304 Stainless steel for positioning and mounting of the columns and the service systems required for the operation of the plant. Electric and hydraulic material made of PVC.

Find more here - https: / / www.ucymachines.com /

état

année de construction

Machine sous tension